Mangueiras de Conexão

entradas por página

20

1 - 20 / 101

Schlauch NBR25 K25N-K25K 10 meters

Novo

gas hose, length 10 m for Mobile Gas Flare M NBR, both sides Camlock Adapter. Coupling DN 25 on one side, nipple DN 25 on the other, max. pressure 16 bar

Hose Hyd16 2m Geka-S5020N

Novo

- drain hose for use with the test head HANS and EDS2-V - nominal diameter DN16 for low pressure loss and optimal flow rate - Geka coupling on one side, nipple S 5020 on the other side

Hose NBR25 K25N-K25K 5 meters

Novo

gas hose, length 5 m for Mobile Gas Flare M NBR, both sides Camlock Adapter. Coupling DN 25 on one side, nipple DN 25 on the other, max. pressure 16 bar

Hose NBR 3m S2520N-claw

Novo

Pressure hose, gas resistant, length 3 m, NBR DN13, one side nipple series 2520, other side claw coupling, max. pressure 16 bar For pressurising pipelines via test specimen HEINZ

Hose Hyd20 10m S5020N-S5020N

Novo

Pressure hose DN 20 x 10 meters for MPP 70-35 both. series 5020 plug nipple and protective cap

Connecting hose v-measurement OLLI

Novo

Hose set for use of the v-measurement in the OLLI for the mobile gas flare S, M and L CH4. On the inlet side there is a single hose connection with S20 nipple, which is plugged into a suitable coupling in the connection area of the mobile gas flare. On the outlet side, there are two hoses with S20 couplings for concentration measurement (red hose, pressure reducer 50 mbar integrated) and for pressure measurement (black hose) in the OLLI.

Pressure hose Hyd16 DN 16 10 m

for MPP 30 and MPP 68 both-sided plug nipple 5020 and protection cap

Connecting hose pressure test

- for tightness and stress test - with drain valve and two couplings S 20 for connection of hand pump and pressure measurement instrument - cross fitting for connection to coupling S 21 - max. pressure 2 bar

Balloon with red protection bag

with connection nipple series 21, ball valve for HESV

Hose NBR50 10m K50N-K50K

Gas hose DN 50, length 10 m - electroconductive hose with R < 10 to the 6 Ohm with Camlock coupling and Camlock nipple - operating pressure 16 bar - operating temperature: -30 °C to +80 °C short-period 95 °C - bend radius 408 mm - NBR

Pressure resistant Y-connection for 2-pipe testcap

for pressure testing on both sides of two-pipe meters. The two paths can be blocked separately by ball valves.

Connecting hose GasTest delta3

for serviceability & regulator test with nipple to connect the pressure balloon for safety valve test to conduct a manual regulator test. For serviceability test and automatic regulator test the nipple remains unused.

Hose NBR13 5 m for Mobile Gas Flare S

gas hose, length 5 m for Mobile Gas Flare S NBR, both sides Camlock Adapter. Coupling DN 15 on one side, nipple DN 15 on the other, max. pressure 10 bar

Hose NBR32 10m K32N-K32K

Gas hose DN 32, length 10 m - electroconductive hose with R < 10 to the 6 Ohm with Camlock coupling and Camlock nipple - operating pressure 20 bar - operating temperature: -30 °C bis +80 °C short-period 95 °C - bend radius 256 mm - NBR

Exhausting hose electroconductive

Exhausting hose electroconductive length: 10 m with nipple S 21 and ball valve for the gas exhausting highly flexible, inner diameter 8 mm with 3,5 mm wall thickness flow rate ca. 2 m³/h at 20 - 30 mbar

Spiral hose 6 m for S21K-S17K

Connecting hose for Druktest max spiral hose 6 m with 2 couplings, series 17 and series 21

Pressure Hose Hyd12 DN 12 10m

for MPP 11 an MPP 28 both-sided plug nipple 5020 and protection cap

Connecting hose PUR 2m S21N-S20C

red 4 mm, length: 2 m

Connecting hose GT delta usability with bubble and filter

In- and output tube with gas bubble to pressure bumpless usability testing

Connection hose Tygon 6,4x1,6mm incl. T-piece with drain valve

Connection hose Tygon 6,4 x 1,6mm incl. T-piece and drain valve

entradas por página

20

1 - 20 / 101