Outro

 entradas por página 
20
 1 - 20 / 105 
Regulating valve for test gas Ecomini 80 l/h
Novo
for test gas cans 0.85 litre, 0.9 litre and 1.65 litre 35 bar / 70 bar
Extraction regulator for direct connection to test gas cans.
Gas flow limitation 80 l/h for targeted test gas supply.
Attention: coupling with free passage! Danger of bursting with closed passage!Regulating valve for test gas Ecomini 120 l/h
Novo
for test gas cans 0.85 litre, 0.9 litre and 1.65 litre 35 bar / 70 bar
Extraction regulator for direct connection to test gas cans.
Gas flow limitation 120 l/h for targeted test gas supply.
Attention: coupling with free passage! Danger of bursting with closed passage!Adapter C50C to 2 1/2 inch with O-ring seal
Novo
Adapter for the Mobile Gas Flare L for use in blow-out units that are difficult to access. Connections: 2 1/2" ET with O-ring on the inlet side, DN50 Camlock coupling on the outlet side DN50 gas hose with Camlock nipple can be connected directly. 
Max. pressure 16 barEDS2 level probe
Novo
External sensor can be connected to the measuring device, integrated connection cable 0.5 metres
Sensor type: Level probe
Measuring principle: Pressure measurement
Measuring range: 300 mm
Measuring accuracy: 0.3 mm at 20°C
Resolution: 0.1 mm
Operating temperature: +3 °C to +40 °C
Maximum immersion depth: 500 mmPanasonic Toughbook FZ-G2 MK 1, GPS
For use in the professional gas leak detection
With its capacitive 10-finger multi-touch outdoor display this
System ideally suited to optimize the work in the field.

- Intel® Core i5-10310U vPro processor
- 512 GB NVMe Opal SSD, 16 GB RAM
- Highly luminous 10.1 "large WUXGA display (1920 x 1200) with up to 1000 cd / m2
- Capacitive 10-finger multi-touch screen and digitizer
- Bluetooth® Version 5.1, dGPS (u-blox NEO-M8N), WLAN 802.11ax
- 1x USB-A 3.0, 1x USB-C, 1x LAN
- Front & Rear camera
- Water and dust proof (IP65) *
- Up to 10 hours of battery life (50 Wh)
- Battery replaceable by user
- Lightweight design - Weight 1.1 kg
- Withstands drops from up to 180 cm height*
- 3-year standard warranty
- incl. mains plug & digitizer pen
*manufacturer informationControl panel for Mobile Gas Flare S
including pressure reducer (1bar), control manometer,
couplings (S21 and S20) for concentration measurements and pressure measurements
and ball valve, Kamlok Nippel inlet side and Kamlok coupling outlet side,
max. inlet pressure 10 bar, outlet pressure limited to 1 bar for Mobile Gas Flare SGas inlet screw - with nipple series 20
for SIGI EX, SAFE EthanTest, GOLIATH, HUNTER,
Laser HUNTER and HUNTER H2Panasonic Toughbook FZ-G2 MK 1, LTE
For use in the professional gas leak detection
With its capacitive 10-finger multi-touch outdoor display this
system is ideally suited to optimize the work in the field.

- Intel® Core i5-10310U vPro processor
- 512 GB NVMe Opal SSD, 16 GB RAM
- Highly luminous 10.1 "large WUXGA display (1920 x 1200) with up to 1000 cd / m2
- Capacitive 10-finger multi-touch screen and digitizer
- Bluetooth® Version 5.1, 4G/LTE, WLAN 802.11ax
- 1x USB-A 3.0, 1x USB-C, 1x LAN
- Front & Rear camera
- Water and dust proof (IP65) *
- Up to 10 hours of battery life (50 Wh)
- Battery replaceable by user
- Lightweight design - Weight 1.1 kg
- Withstands drops from up to 180 cm height*
- 3-year standard warranty
- incl. mains plug & digitizer pen
*manufacturer informationReplacement barcode scanner for DruckTest memo BC
Replacement for defective scanner with spiral cable and angled connectorBasic amount for GasCam operation
Basic amount for GasCam operation 
- GasCam measurement at operating place  
- Recording videos / pictures for dokumentation of measurement resultsPaper roll for thermal printer IR 58 mm
for HMG, GasTest delta3 and SAFE EthanTest
length approx. 10 mConnecting cable MPP 30-30/70-35 - smart memo
Enables communication between MPP 30-30/70-35 and the smart memo. 
Length: 5 mPaper for roll for thermal printer IR 112 mm
for thermal printer GasTest delta, DruckTest memo/GT
- length approx. 28 m
- for about 80 prints of 300 mm lengthGas inlet screw - with nipple S 20
for OLLI
Material: plasticScrew cap 1620 stainless steel for memo / GT
Connecting accesory for ignition module for Mobile Gas Flare L/gas test standpipe
Connecting accesory for ignition module for gas standpipe
including shut-off valve and 5 m propane hoseComfort headphone for leak detector LS-01 - 8-pin plug -
- 8-pole triad connector version -
Headphones with larger cone and extended listening comfort.Ground stake, stainless steel
with bayonet couplingDust cap for coupling 2510
Thermal printer IR 112 mm for GasTest delta/DruckTest GT
- paper width: 112 mm 
- powered by rechargeable battery 
- infrared interface for data transmission
- battery charger for GasTest delta can be used
- dimensions: 170 x 160 x 67 mm entradas por página 
20
 1 - 20 / 105 

Outro

Regulating valve for test gas Ecomini 80 l/h

Regulating valve for test gas Ecomini 120 l/h

Adapter C50C to 2 1/2 inch with O-ring seal

EDS2 level probe

Panasonic Toughbook FZ-G2 MK 1, GPS

Control panel for Mobile Gas Flare S

Gas inlet screw - with nipple series 20

Panasonic Toughbook FZ-G2 MK 1, LTE

Replacement barcode scanner for DruckTest memo BC

Basic amount for GasCam operation

Paper roll for thermal printer IR 58 mm

Connecting cable MPP 30-30/70-35 - smart memo

Paper for roll for thermal printer IR 112 mm

Gas inlet screw - with nipple S 20 for OLLI

Screw cap 1620 stainless steel for memo / GT

Connecting accesory for ignition module for Mobile Gas Flare L/gas test standpipe

Comfort headphone for leak detector LS-01 - 8-pin plug -

Ground stake, stainless steel

Dust cap for coupling 2510

Thermal printer IR 112 mm for GasTest delta/DruckTest GT