Menu
Acessórios de Conexão

Adaptador

Linha em polegadas1 1/4 Zoll AG1 1/4 Zoll IG1 Zoll AG1 Zoll IG1/2 Zoll AG1/2 Zoll IG1/4 Zoll AG1/4 Zoll IG1/4 Zoll L1/8 Zoll AG1/8 Zoll IG2 1/2 Zoll IG2 Zoll AG2 Zoll IG3/4 Zoll AG3/4 Zoll IG3/8 Zoll AG3/8 Zoll IG
Linha métrica12L-12SM10x1 AGM2,5 AGM20 IGM22 IGM24 AGM35M5 AGM5 AG - M2,5 AGM5 IGM6 AGM8 AG
Linha da esquerda12L AG12L IG12S IG8L AG8L IG
Bico de mangueira1/16 Zoll10 mm - 6 mm2,3 mm2,5 mm3 mm3,2 mm32 mm4 mm5 mm6 mm6 mm - 4 mm7 mm8 mm - 4 mm9 mm
Series 17simNão
Series 20simNão
Series 21simNão
Series 26simNão
Series 2500simNão
Series 5000simNão
StorzsimNão
KamloksimNão
GEKAsimNão
Acoplamento de garrasimNão
GardenasimNão
simNão
simNão
Válvula de drenagemsimNão
Conexão de rosca6/48/6
LuerlocksimNão
Válvula esféricasimNão
entradas por página
1 - 20 / 205
Control panel for Mobile Gas Flare M
Novo
Control panel for Mobile Gas Flare MConnection adapter 1 inch external thread, including pressure reducer and integrated valve for connecting the Mobile Gas Flare M to gas pipes. - Integrated pressure reducer for restricting the inlet pressure at the mobile gas flare (max. 1bar) - Integrated shut-off valve for safe gas inlet and flow restriction - Series 21 coupling and screw coupling for connecting a pressure or concentration measuring device - 1" ET on the inlet side, Camlock coupling DN25 on the outlet side - max. pressure 16 bar
Adapter S5020N-T5010K-T5010K with ball valve
Novo
Adapter S5020N-T5010K-T5010K with ball valveOptional additional part to the Test head HEINZ for carrying out water pressure tests according to W400-2. The pressure hose of the pump and an EDS2-V can be connected to the HEINZ at the same time via the T-piece. Connections: T-piece With nipple Series 5020 (Series 5000) and 2x coupling Series T 5010 with ball valve (Series 5000)
Adapter C25C to 1 inch with O-ring seal
Novo
Adapter C25C to 1 inch with O-ring sealAdapter for the Mobile Gas Flare M for use in hard-to-reach blow-out units. Connections: inlet side 1" ET with O-ring, outlet side Сamloсk coupling DN25 Gas hose DN25 with Сamloсk nipple can be connected directly. Max. pressure 16 bar
Adapter DN claw coupling to S5020N
Novo
Adapter DN claw coupling to S5020NClaw coupling with connecting nipple series 5020
T-connector C25N-C25C-C25C
Novo
T-connector C25N-C25C-C25CT-connector with camlock connections for parallel operation of two devices of Mobile Gas Flare M max. pressure 16 bar
Adapter ventilation with sound insulation
Novo
Adapter ventilation with sound insulationwith nipple series 5020 can be used with test body HANS
Adapter DN15C to 2x DN15C
Novo
Adapter DN15C to 2x DN15CCompressed air manifold DN15 with claw coupling and ball valve on the inlet side, 2 outlets with claw coupling on the outlet side for simultaneous pressurisation of pipelines, e.g. for tests according to FW 602. Max. pressure: 16 bar
T-piece C25C/S20C/C25N
Novo
T-piece C25C/S20C/C25NOptional adapter for using the v-measurement in the OLLI for the Mobile Gas Flare M. The appropriate connecting hose for v-measurement with the OLLI (article 285076) is also required.
T-piece C15C/S20C/C15N
Novo
T-piece C15C/S20C/C15NOptional adapter for using the v-measurement in the OLLI for the Mobile Gas Flare S. The appropriate connecting hose for v-measurement with the OLLI (article 285076) is also required.
Adapter S21C to S26C
Novo
Adapter S21C to S26CAdapter from quick coupling Series 21 to compressed air coupling (nominal size 7.2) Series 26 P. max 35 bar
Adapter S5020N to T2510C
Novo
Adapter S5020N to T2510CAdapter for use of HEINZ accessories (nipple series 2500) with test head HANS (coupling series 5000) Nipple Series 5020 to coupling Series T 2510
v-Measuring tube C25
Novo
v-Measuring tube C25Optional accessory for the Mobile Gas Flare M for measuring and monitoring flow velocity in conjunction with the GOLIATH. The GOLIATH is connected via a suitable hose connection set to measure the speed and the gas concentration (Coupling Series 20). Connections on the input side: Camlock nipple DN25 on the output side: Camlock coupling DN25. Length: approx. 50 cm
T-piece C50N-C50C-C50C
Novo
T-piece C50N-C50C-C50CT-distributor Camlock DN 50 for simultaneous connection of 2 gas flares L or XL.
Pressure reducer Mobile Gas Flare L with V-measurement connection
Novo
Pressure reducer Mobile Gas Flare L with V-measurement connection- Pressure reducer to limit the inlet pressure on the mobile gas flare - Camlock nipple DN50 on the inlet side - Camlock coupling DN50 on the outlet side - Series 20 coupling for measuring the gas concentration/outlet pressure (V measurement) - max. operating pressure 16 bar The outlet pressure is set to the ideal range for the Mobile Gas Flare L at the factory. This must not be changed!
Camlock angle adapter DN50
Novo
Camlock angle adapter DN5090 degree Camlock adapter - Camlock nipple DN50 to Camlock coupling DN50 - material: brass
Adapter 1620N to 1/4 IT made of stainless steel
Adapter 1620N to 1/4 IT made of stainless steelAdapter nipple 1620 to 1/4 internal thread Adapter for screwing onto coupling. Other connections can be made via the 1/4 inch internal thread. Material: stainless steel max. operating pressure 630 bar
Coupling series T2510 internal thread G1/4
Coupling series T2510 internal thread G1/4Pmax = 450bar
Adapter test coupling S21C to 1/8 inch
Adapter test coupling S21C to 1/8 inchAdapter test coupling series 21 to 1/8 inch for measuring at the 1/8 inch connection of the controller
Flow reducer for DWZ/EDS2-V
Flow reducer for DWZ/EDS2-V- additional accessories for reducing volume flow for small drainage volumes up to approx. 500 ml - Geka coupling
Adapter test coupling S21K to 1/8" inch angled
Adapter test coupling S21K to 1/8" inch angledAdapter test coupling series 21 to 1/8" inch to measure at the 1/8" connection of the regulator. Version with rotatable angle for hard to reach connections.
entradas por página
1 - 20 / 205
keyboard_arrow_up